Exe version: NCKBox AndroidMTK 2.9
Selected model: MobiWire  Kicka 4 Plus
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM3)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB  DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) KSI 0x454534494134
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 700100454534494134 : 00000000000000
EMMC UA SIZE: 0xe2000000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe2480000      [3.536 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM4)
Phone have OTP partition.
OTP IMEI: 358014100XXXXXX
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:0) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Unlocked (remain:255) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
[2060]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
[0]All done.

---------------------------

UltimateNCKHuawei.exe - Application Error
---------------------------
The application was unable to start correctly (0xc0150002). Click OK to close the application.
---------------------------
OK
---------------------------



Those who are facing this error , can be solved by installing this C++ Distribution

https://www.microsoft.com/en-us/download...aspx?id=29

PS: if you are using 64 bit operating this system no matter you have to install this C++ distribution , as i already test on both OS 32 and 64 bit

BR
MRGSM



Application unable to start correctly (0xc0150002)
Sigma Key
NCK Box

JAT-L29 FRp Done by Avenger Box 
JAT-L29 FRP by testpoint 
JAT-L29 FRP one click by Avenger Box



Exe version: Avengers Box MTK 0.7.1
Selected model: Huawei  JAT-L29
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port_V1632 (COM96)
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6765 0 ca00
Using Algo 1.
Helio MT6765 phone detected, swithing to helio api
Loading emmi from database
Helio enabled DRAM in First Da: TRUE
Sending loader.....
BBCHIP MT6765
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010051443633 : 000000000000000000
EMMC UA SIZE: 0x747c00000   
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x749400000      [29.145 GB]
Modem version: MOLY.LR12A.R2.TC3.UNI.SP.V2.P213
Starting helio frp, not disconnect phone untill done
[HELIO][frp]Format partition, please wait...
[0]FRP Reset Done.
[helio]Wait untill phone will start charging.
[0]All done.

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 196 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer  : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040505A24F4012C3
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040505A24F4012C3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xD50B95F4B253A26FFDB448F5B1DB01B4
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand    : Welcome
ProdName  : P30_Lite
ProdModel : T702
Device    : P30_Lite
AndroidVer: 5.1
CU_SWVer  : V1.0.2
MTKxCPU  : MT6580
MTKxPRJ  : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

[Read Ok] : preloader_hct6580_weg_a_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / hct6580_weg_a_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1399 MiB
Scatter saved to : C:\Users\muzamil\Desktop\MT6580__Welcome__T702__P30_Lite__5.1__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55\

All done!

Done!
Elapsed: 00:06:26
Reconnect Power/Cable!

 
paid file for file contact whatsapp     03421959546   
aid

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
   
   
2. Insert USB cable. In some cases require hold BootKey
   

1. Power Off Phone , Remove battery , Insert back
   
   
2. Insert USB cable. In some cases require hold BootKey
   

Created by Infinity-Box © 2019
Chinese Miracle II : MediaTek Service Module
Device Info file  : _Android_info.txt

Patch Level    : MRA58K
Display ID    : MRA58K test-keys
Ver. CodeName  : REL
Ver. Release  : 6.0
Sec. Patch    : 2017-03-05
Build Time    : 1567591638
Product Model  : PHANTOM P2 MAX
Product Brand  : welcome
Product Name  : PHANTOM_P2_MAX
Product Device : PHANTOM_P2_MAX
Product Manfct : welcome
Board Platform : mt6570
Product Info  : PHANTOM_P2_MAX


https://mega.nz/#!lRdhAahL!QmqPNelEnQS8-...Ptu9P-ojx8

for file password contact
whatsapp 03421959546
for file password

whastapp 0342195

for file pasfor file password

whastapp 03421959546sword

whastapp 03421959546

Created by Infinity-Box © Chinese Miracle II © 2016
Device Brand  : VIPRO
Device Model  : A1802
Device CPU    : MT6580
Device IntName : A1802
Device Version : 5.1
CU_SWVer      : V1.0.1
Device Compile : 3/15/2019 6:09:35 AM
Device Project : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55
Device ExtInfo : A1802


https://mega.nz/#!gZMF0aKJ!CgOexh9nsQdSV...yJW_c-pPb8

whatsapp     03421959546